O P E R AT I N G I N S T R U C T I O N S |
Bulkscan LMS511
8014829/ZNC5/2017-06-06|
S I C K
Subject to change without notice
6 3
COMMISSIONING
How to carry out a reference measurement:
Start SOPAS and establish a connection to the sensor.
Log in as Authorized client.
On the
Operating mode
configuration bar, click
Measuring mode
.
Switch to the
Compensation function
tab.
Click Start to start the reference measurement.
The compensation function is reset to the default values.
The 7-segment display shows
.
Place a defined reference volume on the conveyor belt.
Ensure that hazard-free operation is possible
and start the full conveyor belt.
Wait until the bulk has moved completely under the sensor.
Click
Stop
to end the reference measurement.
If you want to calibrate the sensor to a volume range, then perform up to 9 further
measurements now (click
Start
, fill and start conveyor belt, click
Stop
). For calibra-
tion to a nominal volume a single reference measurement is sufficient.
Choose the desired
Compensation function
.
Click on
Calculate
. The compensation function is calculated and transferred to the
sensor immediately.
Note
