GETTING STARTED…
4
99
8024172/V3-0/2021-01
Subject to change without prior notice.
Operating instructions | LABEL CHECKER P6XX
SEMI-CONNECTED CHARACTERS WIDTH EXAMPLE
Wide width
The brief result only
shows five read
characters. Since the
character width was
adjusted to 200 pixels,
then the LBC is only
trying to read the
specified character width
value of 200 px.
Default value
Narrow width
The LBC is only reading the
character width up to 20
pixels. The character width
value is too low that the LBC
was not able to read a
favorable result.
Figure 69 Semi-connected characters width examples
Semi-connected character scenario sample: When segmenting characters/numerals
that are almost connected/entirely connected, it very important to specify the following:
Character stroke width
Partition method
Fragment distance
Character width and height
The following sample shows the character width and height with the same value, but with
different Partition, distance, and stroke width values. You will be able to set the optimal
result of the label sample, if you will try to establish the correct or the nearest value of the
character/number pixel x, y.
OPTIMAL RESULT
UNFAVORABLE RESULT
Figure 70 Character width and height examples
