![background image](http://html.mh-extra.com/html/sick/1086947/1086947_operating-instructions-manual_1264314208.webp)
5
LBC SOFTWARE
208
8024172/V3-0/2021-01|SICK
Oper at i ng i ns t r uc t i ons | LABEL CHECKER P6XX
Subject to change without prior notice.
5.3
Backup transfer to another camera and to HDD
You can easily use the SD card backup cloning function, to transfer your settings into
another camera. In case you do not have an SD card or you would like to transfer your
configuration on your laptop HDD, please find
subsection 4.19.7 of SD card backup
cloning
, for further information.
It’s highly recommended to remove all the contents from the destination camera.
If the camera is new, then this procedure is not necessary.
If an SD card is present in the camera, the files in the SD card will not be visible via the
AppManager. Please use the SD card backup cloning function first, and copy the files
from SD card into the camera’s memory. Afterwards, remove the SD card, restart the
camera, and access the files.
Please make sure that both cameras have the same version of InspectorP firmware and
LBC software (they must be of the same type, e.g. LBC621). Please, refer to subsection
5.4 Backup between versions
, in case the versions/types are different.
The Job settings, including a few settings (i.e. digital I/O settings) will be transferred as
well.
Please proceed as follows:
You can choose the way of backing up the settings files, via AppManager (recommended)
or via FTP connection:
1.
Follow the first step from the LBC update procedure (either for using AppManager
or FTP connection), please find
subsection 5.2 Software update procedure and
handling license file
. Then, select all of the files (to be transferred) from the
public folder to the camera.
The number of the files can vary. Copy these files to HDD or USB stick.