SICK 1086947 Operating Instructions Manual Download Page 92

Page: 92 / 239

GETTING STARTED

8024172/V3-0/2021-01|SICK

Oper at i ng i ns t r uc t i ons | LABEL CHECKER P6XX

Subject to change without prior notice.

11.

Specify the following Thresholding method:



- No parameters; easy to use. The Auto threshold is

highly recommended for inconsistent sample text and complicated

backgrounds. Although it will take some time during reading. Auto

threshold works the same way as local threshold and automatically

calculates mask size.



– Calculates the threshold on the areas, depending

on the local threshold Mask size. Best used for samples with background

of various shades.

Figure 66 Local threshold



- Usually the fastest method. Best used for

character/numeral samples with same/constant background/character

shade.

Figure 67 Manual threshold

12.

Choose the applicable character font.

Summary of Contents for 1086947
















































































































































































































































Search results

Summary of Contents for 1086947

Reviews:

Brands by name

Popular brands

SICK 1086947, Operating Instructions Manual

Search results

Summary of Contents for 1086947

Reviews:

Brands by name

Popular brands