GETTING STARTED…
4
111
8024172/V3-0/2021-01
Subject to change without prior notice.
Operating instructions | LABEL CHECKER P6XX
4.10.2
Dot peening
Dot peening code are created from small dots.
Threshold – Locates the dots.
Dilation mask width – Dilates the rectangles from these dots to create a readable
2D code.
Dilation filter – reduces the following:
o
The holes that are enclosed in a single region
o
The gaps between different regions
o
The small intrusions into boundaries of a region are filled-in
4.10.3
Inverted
The Inverted mode is used for inverse 2D codes.
4.10.4
Specific number of characters
The value of the desired 2D code can be set or changed by adjusting the track bar.
4.10.5
Quality check
Determines how the printing quality for 1D/2D code is printed.
Minimum quality required
Equivalent to OCR/OCV minimum confidence. If the quality check was enabled, then the
printing quality of read 2D code is determined and compared to the required minimum
quality. Higher quality will present positive result.
