Sices HS 315, Technical Handbook

Page: 29 / 255

Technical Handbook 11
Settings Baud rate selectable by parameter: 300, 600, 1200, 2400,
4800,
9600
*
, 19200, 38400, 57600, 115200 bps
Parity: None
*
, Even, Odd
Stop bit: 1
*
,2
*
Default Setting
Type of transmission
Modbus RTU Slave
*
, Modbus RTU Master
*
Default Setting
Insulation voltage 560Vdc max.
1KVdc on transient < 60s.
USB 2.0 Communication interface - JB
Interface type 1 USB2.0 serial port not insulated, which can be used in
Function mode.
Connection to PC by Sices Driver
USB Connector type B.
Type of transmission Modbus RTU Slave
Maximum distance 6m (20 feet)
CANBUS Communication interface - JO
Interface type One CANBUS port with galvanic insulation.
1 RS485 serial port standard TIA/EIA, with galvanic
insulation.
Terminal resistor connectible by connecting to each other
terminals 4 and 5 of di JO.
CanBus0 CANBUS connection with protocol SAE J1939 and MTU
for ECU engine control.
Nominal impedance
120Ω
Insulation voltage 560Vdc max.
1KVdc on transient < 60s.
Ethernet Communication interface - JS
Interface type 1 Ethernet interface 10/100Mbps full-duplex 10T/100Tx
Auto
HP Auto-Mdix support
Compliant IEE802.3/802.3u (Fast Ethernet)
Compliant ISO802-3/IEEE802.3 (10BASE-T)
Insulation voltage 1500VRMS
Display
Display type Transflective graphic monochrome LCD with backlight
illumination with white leds.
Resolution 128 x 64
Pixel Size 0,48 x 0,48 mm
Visual area dimensions 70 x 38 mm