Sices HS 315, Technical Handbook

Page: 248 / 255

230 Technical Handbook
Charge/discharge current Adc M.15
Average temperature °C M.15
Charge level Ah M.15
Bus voltage Vdc *
Central temperature °C
*
Lateral temperature (1) °C
*
Lateral temperature (2) °C *
Electronic card temperature °C
*
Central heater command %
*
Lateral heaters command %
*
Date/time s
*
Alarms/warnings - S.02
I/O status - -
LED lamps status - -
Model - M.16
Serial number - M.16
*: these data are not displayed; they are readable by HS315 via Modbus.
HS315 can use highlighted data instead of its measured ones.
The management of the alarm/warnings coming from the battery is like that of CANBUS
engines. In practice, HS315 handles only two cumulative:
•
W226: cumulative warnings of the batter
ies’ electronic cards.
•
W227: cumulative alarms of the
batteries’ electronic cards.
On page S.02, when one of the alarms/warnings is present, HS315 displays the active
diagnostic codes on the last line (rotating if more than one).
The possible codes are:
•
0: Minimum Ambient Temperature alarm"
•
1: Maximum ambient temperature warning
•
2: Maximum ambient temperature alarm
•
3: Minimum battery temperature alarm
•
4: Maximum battery temperature warning
•
5: Maximum battery temperature alarm
•
6: Minimum bus voltage warning
•
7: Minimum bus voltage alarm
•
8: Maximum bus voltage warning
•
9: Maximum bus voltage alarm
•
10: Maximum bus discharge current warning
•
11: Maximum bus discharge current alarm
•
12: Battery insulation warning
•
13: Main switch error alarm
•
14: Fuse blown alarm