Sices HS 315, Technical Handbook

Page: 82 / 255

64 Technical Handbook
INFORMATION
: Make sure SIM
card does not require PIN code. If it
does, it is possible to disable it in any
common network unlocked mobile
telephone.
Ensure the device is powered off, then
remove the back cover from the device.
Remove the access cover that encloses
the SIM holder, the antenna connectors
and the battery switch.
Insert a small screwdriver in the little
retention hooks and make a slight
leverage to remove the panel.
After opening the cover, you will see the following
parts:
A. SMA FEMALE connector for GSM - LTE antenna.
B. SMA FEMALE connector for GNSS antenna.
C. SIM card holder slide.
D. Switch for internal optional battery (inserted/not
inserted).
E. Yellow LED: indicator for Network Status (NET).
F. Green LED: indicator for Module power on/off
status (STATUS).
G. Internal Battery connector
Pull back the upper cover, it clicks as it unlocks. (fig.1).
Open the SIM card holder, it hinges towards you (fig.2).
Fig.1 Fig.2