Sices HS 315, Technical Handbook

Page: 227 / 255

Technical Handbook 209
To disable: P.0142=0 e P.0143=0
Enabled in: MAN, AUTO, TEST, REMOTE START
Override: -
This warning is enabled if a number of analogue modules other than zero has been set (in
parameters P.0142 or P.0143). It activates if one or more CAN-BUS (EXBUS) measures are
not properly configured or in case of faulty sensor. Page S.02 shows the faulty channel and
module.
Type: Warning
Related parameters: P.0141 Number of DITEL modules.
P.0142 Number of DITEMP modules.
P.0143 Number of DIVIT modules.
P.0144 Number of DANOUT modules.
To disable: -
Enabled in: MAN, AUTO, TEST, REMOTE START
Override: -
This warning is enabled if a number of modules other than zero has been set (in parameters
P.0141, P.0142, P.0143 or P.0144). It is activated in case of hardware addresses conflict for
one or several controllers connected to CAN-BUS (EXBUS). Page S.02 shows the module
with conflict.
Type: Warning
Related parameters: P.0142 Number of DITEMP modules.
P.0143 Number of DIVIT modules.
To disable: -
Enabled in: MAN, AUTO, TEST, REMOTE START
Override: -
This warning is enabled if a number of analogue modules other than zero has been set (in
parameters P.0142 or P.0143). It activates if an analogue sensor has not been physically
connected to an analogue input of the controller on CAN-BUS (EXBUS). Page S.02 shows the
faulty channel and module.
Type: Latched warning
Related parameters: P.9641 Nominal voltage (DC).
P.9741 Loads voltage hysteresis.
P.9742 Min loads voltage threshold.
P.9743 Min loads voltage delay.
To disable: P.9743 = 0
Enabled in: MAN, AUTO, TEST, REMOTE START
Override: -
This protection works on the DC voltage of the common bar. Its purpose is to protect the loads
from low voltages. Since
there isn’t a DC measure for the common bar, the protection works
with the loads DC voltage if LCB is closed. If LCB is opened, the protection is disabled. It is
activated if the measure of the voltage remains continuously below to threshold P.9742
(percentage of the rated voltage P.9641) for time P.9743.