21
3.4.4
Control Box Power Supply Cable
When the control cabinet is powered by 220V, the maximum power is 3000W,
and the standard 16A power plug is used as the power supply cable plug of the
control box. The standard power supply cable of the control box is 5m long, and
other standard length power supply cables are available for purchase. When the
control box is powered by non-220V, the power supply cable plug of the control
box uses crimped cold-pressed terminals due to current limitation. It is
recommended to directly connect to the air switch of the power distribution box.
The standard 16A power supply plug of the
control box cannot be directly connected to
the 10A socket. If it is powered by the socket,
it must be equipped with a power cable that
can meet the current requirement of 16A and
a matching 16A socket.
If there is no 16A socket on site, cut off the
16A plug, crimp the terminal that meets the
requirements of 16A, and directly connect to
the power distribution box.
图
3.4.4 10A and 16A plug and socket comparison
Summary of Contents for GCR20-1100
Page 1: ...GCR20 1100 Collaborative Robot User Manual Hardware Model GCR20 1100 V2 0 SIASUN Co Ltd...
Page 30: ...26 Figure 4 1 4 1 Robot zero position and positive direction schemata...
Page 37: ...33 Axis Stop distance deg Stop time ms A1 10 7213 217 A2 11 5897 229 A3 16 4914 307...
Page 39: ...35 Image Nameplates and labels...