Shuttle AV49 Manual Download Page 67

Page: 67 / 85

- 65 -

CPU & PCI Bus Control

Options are in its sub-menu.
Press <Enter> to enter the sub-menu of detailed options.

CPU to PCI Write Buffer

When this field is Enabled, the writing from CPU to PCI bus is buffered,

to compensate for the speed differences between the CPU and the PCI

bus. When Disabled, the writing is are not buffered and the CPU must

wait until the write is complete before starting another write cycle.

The Choice: Enabled or Disabled.

PCI Master 0 WS Write

When this item enabled, writing to the AGP bus is executed with zero

wait state.

The Choice: Enabled or Disabled.

PCI Delay Transaction

The chipset has an embedded 32-bit posted write buffer to support

delay transactions cycles. Select Enabled to support compliance with

PCI specification version 2.1.

The Choice: Enabled or Disabled.

VLink 8X Support

Enable this item will set VLink 8X transfer mode. Disable it will set

VLink 4X transfer mode.

The Choice: Enabled or Disabled.

Memory Hole

In order to improve performance, some space in memory can be

reserved for ISA cards.

The Choice: Disabled or 15M-16M.

System BIOS Cacheable

Selecting Enabled allows caching of the system BIOS ROM at F0000h-

FFFFFh, resulting in better system performance. However, if any pro-

gram is written to this memory area, a system error may result.

The choice: Enabled or Disabled.

Video RAM Cacheable

Selecting Enabled allows caching of the video RAM , resulting in better

system performance. However, if any program is written to this

memory area, a system error may result.

The Choice: Enabled or Disabled.

Summary of Contents for AV49






















































































Search results

Summary of Contents for AV49

Reviews:

Related manuals for AV49

Brands by name

Popular brands

Shuttle AV49, Manual

Search results

Summary of Contents for AV49

Reviews:

Related manuals for AV49

Brands by name

Popular brands