Shuttle AV49 Manual Download Page 63

Page: 63 / 85

- 61 -

Typematic Delay (Msec)

Sets the delay time after the key is held down before it begins to repeat

the keystroke.

The choice: 250, 500, 750, or 1000.

Security Option

Select whether the password is required every time the system boots or

only when you enter setup.

System

The system will not boot and access to Setup will be

denied if the correct password is not entered promptly.

Setup

The system will boot, but access to Setup will be

denied if the correct password is not entered promptly.

The choice: System or Setup.

Note: To disabled security, select PASSWORD SETTING at Main

Menu, and then you will be asked to enter password. Do not

type anything and just press <Enter>; it will disable security.

Once the security is disabled, the system will boot, and you can

enter Setup freely.

OS Select For DRAM > 64MB

Selects the operating system that is running with greater than 64MB of

RAM in the system.

The choice: Non-OS2 or OS2.

Video BIOS Shadow

Determines whether video BIOS will be copied to RAM. However, it is

optional depending on chipset design. Video Shadow will increase the

video speed.

The choice: Enabled or Disabled.

Small Logo(EPA) Show

This item allows you to enable/disable the EPA Logo.

The choice: Enabled or Disabled.

Summary of Contents for AV49






















































































Search results

Summary of Contents for AV49

Reviews:

Related manuals for AV49

Brands by name

Popular brands

Shuttle AV49, Manual

Search results

Summary of Contents for AV49

Reviews:

Related manuals for AV49

Brands by name

Popular brands