- 39 -
E1
F
F
F
F
F
Other Connectors
ATX Power Supply Connector (ATX1/ATX2)
This motherboard uses 20-pin standard ATX power header,
and comes with another two headers.
Another is ATX12V with 2X2-pin +12 VPC ATX power supply header.
Please make sure you plug in the right direction.
A traditional ATX system should remain at power off stage when AC power re-
sumes from power failure. In such case, if there is no an UPS to keep power-on, the
kind of design is inconvenient for a network server or workstation.
However, this motherboard implements an AC Power Auto Recovery function to
solve this problem. You may enable the function "PWRON After PWR-Fail" that is
under sub-menu of "Power Mangement Setup " through BIOS setup program.
Note 1:
Note 1:
Note 1:
Note 1:
Note 1: The ATX power connector is directional and will not go in unless the guides
match perfectly making sure that pin#1 is properly positioned.
Note 2:
Note 2:
Note 2:
Note 2:
Note 2: Make sure the latch of the ATX power connector clicks into place to ensure a
solid attachment.
Note 3:
Note 3:
Note 3:
Note 3:
Note 3: Your ATX power supply must be supplied to ACPI +5V standby power and
at least 720mA compatible.
Note 4:
Note 4:
Note 4:
Note 4:
Note 4: Make sure your power supply have enough power for higher speed processor
installed.
ATX 2
AT
X
1
ATX1
ATX2
