Shuttle AV49 Manual Download Page 69

Page: 69 / 85

- 67 -

Integrated Peripherals

VIA OnChip IDE Device

Options are in its sub-menu.
Press <Enter> to enter the sub-menu of detailed options.

OnChip IDE Channel0

OnChip IDE Channel0
The chipset contains a PCI IDE interface with support to two IDE

channels. Select Enabled to activate the primary IDE interface; select

Disabled to deactivate this interface

The choice: Enabled or Disabled.

OnChip IDE Channel1

OnChip IDE Channel1
The chipset contains a PCI IDE interface with support to two IDE

channels. Select Enabled to activate the secondary IDE interface; select

Disabled to deactivate this interface

The choice: Enabled or Disabled.

IDE Prefetch Mode

IDE Prefetch Mode
The onboard IDE drive interfaces support IDE prefetching for faster

drive access. If you install a primary and/or secondary add-on IDE

interface, set this field to Disabled if the interface does not support

prefetching.

The choice: Enabled or Disabled.

These options display items that defines that the operation of peripheral

components on the system's input/output ports.

Summary of Contents for AV49






















































































Search results

Summary of Contents for AV49

Reviews:

Related manuals for AV49

Brands by name

Popular brands

Shuttle AV49, Manual

Search results

Summary of Contents for AV49

Reviews:

Related manuals for AV49

Brands by name

Popular brands