Shuttle AV49 Manual Download Page 79

Page: 79 / 85

- 77 -

IRQ Resources

When resources are controlled manually, assign each system interrupt a

type, depending on the type of device using the interrupt.
IRQ3/4/5/7/9/10/11/12/14/15 assigned

IRQ3/4/5/7/9/10/11/12/14/15 assigned

This item allows you to determine the IRQ assigned to the ISA bus and

is not available to any PCI slot. Legacy ISA for devices is compliant with

the original PC AT bus specification; PCI/ISA PnP for devices is compli-

ant with the Plug-and-Play standard whether designed for PCI or ISA

bus architecture.

The choice: PCI Device or Reserved.

PCI/VGA Palette Snoop

It determines whether the MPEG ISA/VESA VGA Cards can work with

PCI/VGA or not. If you have MPEG ISA/VESA VGA Cards and PCI/

VGA Card worked, Enable this field. Otherwise, please Disable it.

The choice: Enabled or Disabled.

Assign IRQ For VGA

This item allows the user to set VGA IRQ Routing table Enabled or

Disabled.

The choice: Enabled or Disabled.

Assign IRQ For USB

This item allows the user the option to assign an IRQ to on-board USB

controller. Since the on-board controller is always enabled, if no IRQ is

assigned to it, there will be a question mark report on the sytem device

under Windows95/98.

The choice: Enabled or Disabled.

INT Pin1/2/3/4 Assignment

Names the interrupt request (IRQ) line assigned to PCI 1 throught PCI 4

on system. Activity of selected PCI slot awakens system.

The Choice: Auto, 3, 4, 5, 7, 9, 10, 11, 12, 14, 15.

Summary of Contents for AV49






















































































Search results

Summary of Contents for AV49

Reviews:

Related manuals for AV49

Brands by name

Popular brands

Shuttle AV49, Manual

Search results

Summary of Contents for AV49

Reviews:

Related manuals for AV49

Brands by name

Popular brands