Shuttle AV49 Manual Download Page 73

Page: 73 / 85

- 71 -

Power Management Setup

The Power Management Setup allows you to configure your system to

most effectively saving energy while operating in a manner consistent

with your own style of computer use.

ACPI Function

This item allows you to enable/disable the Advanced Configuration and

Power Management (ACPI)

The choice: Enabled or Disabled.

ACPI Suspend Type

This item allows you to select sleep state when suspend.

The choice: S1(POS), S3(STR), or S1 & S3.

Power Management Option

This category allows you to select the type (or degree) of power saving

mode settings.
User Define

User Define

User Define Allows you to set each mode individually.

HDD Power Down=Disabled or 1min.~15min.
Suspend Mode= Disabled or 1 min ~1 hr.

The choice: User Define, Min Saving, or Max Saving.

Min Saving

Min Saving Minimum power management.

HDD Power Down=Allows you to set each mode

individually.
Suspend Mode=1 hr.

Summary of Contents for AV49






















































































Search results

Summary of Contents for AV49

Reviews:

Related manuals for AV49

Brands by name

Popular brands

Shuttle AV49, Manual

Search results

Summary of Contents for AV49

Reviews:

Related manuals for AV49

Brands by name

Popular brands