Shinko Denshi LF Series, Operation Manual, Page: 91 / 154

5 Function Setting LF(R) Series Operation Manual
- 80 -
5-11 ID No. Setting
Results of successfully completed span adjustments and span tests can be printed by
ISO/GLP/GMP compliant devices. Set the ID number printed with the results.
In situations such as when the same model is used, you can assign numbers that allow you
to easily manage them.
You can use up to six digits in an ID number. The characters that you can use are as follows:
Spaces, 0 to 9, A to F,
− (minus)
1
Go to Function 2 setting mode.
＋
Press the [Function] key while pressing the [Zero/Tare]
key. Release the keys when “Func2” is displayed.
Function 2 setting mode is set and “1. Id 0” is
displayed.
2
Set the ID number. Press the [Zero/Tare] key to select “1.”
3
Go to the ID number setting mode. Press the [Function] key.
4
Enter the ID number.
(When ID number is being displayed or
set, “ ” and “ ▲ ” appear in the upper left of
the display.)
Enter the ID number with the following steps:
(1)Press the [Zero/Tare] key.
The leftmost digit will blink.
(2)Press the [Zero/Tare] key to select a character.
Pressing the key toggles between a space, 0 to 9, A to F,
and – (minus).
(3)Pressing the [Function] key causes the next digit to
blink.
Set the ID number by repeating steps (2) and (3).
5
Save the ID number. Press the [Set] key.
The display changes to “2.o.M.P.0.”
Press the [Set] key again to return to the weight
display.