Shinko Denshi LF Series, Operation Manual, Page: 46 / 154

LF(R) Series Operation Manual 3 Various Measuring Methods
- 35 -
10
Place the sample in the cage. Place the sample in the cage and immerse the sample
fully in the water.
When the weight readout is stabilized, press the [Set]
key.
The measured specific gravity value is displayed.
Keep the cage away from the liquid container.
Pressing the [Function] key toggles the display
between the specific gravity and the volume.
Press the [Set] key to return to the weight display.
3-5-4 When using a liquid other than water
1
Go to the function setting mode.
(Refer to Section 2-6 “Basics of Function
Settings.”)
Press and hold the [Function] key until “Func” is
displayed.
2
Select gravimeter mode. Press the [Zero/Tare] key several times to select “1.SEt
5.”
3
Go to the medium selection mode. Press the [Function] key.
“11.MEd.” is displayed.
4
Select the “Not water” setting. Press the [Zero/Tare] key to select “1” (Not water), and
press the [Set] key.
Now the balance can measure the specific
gravity using any liquid other than water.
Measure the specific gravity with the steps
described in “Measurement” (
page エラー! ブッ
クマークが定義されていません。 ). In step 5, set
the density of the liquid you are using, instead of
the water temperature. The liquid density can be
set to between 0.0001 and 9.999 g/cm
3
.