Shinko Denshi LF Series, Operation Manual, Page: 110 / 154

LF(R) Series Operation Manual 6 Input/Output to/from External Devices
- 99 -
[S2] (one character)
Indicates the status.
S2 Code Description
S 53H Data stable *1
U 55H Data unstable *1
E 45H Data error *2 (Indicates that data other
than S2 is invalid.)
(SP) 20H No status specified
*1: This value is independent of data if the data is independent of whether the weighing
condition is stable or not, such as cumulative values and unit weights.
*2: When “o-Err” or “u-Err” is displayed
Output data other than measurement data
When the following data is output, the printer control command is added before and after
the output data.
(1) Interval output
The header and footer are output at the start and end of interval output.
Header
15 “-” characters and the terminators (CR=0DH, LF=0AH) are output.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
- - - - - - - - - - - - - - -
Footer
Two line feeds are output.
(2) Time output
When the time output function is set, the time is output in the line before the output
data.
1 2 3 4 5 6 7 8 9 10
h h : m
m : s s CR LF
 * hh: hours (00 to 23), mm: minutes (00 to 59), ss: seconds (00 to 59)