Shinko Denshi LF Series, Operation Manual, Page: 101 / 154

6 Input/Output to/from External Devices LF(R) Series Operation Manual
- 90 -
5
Perform the span adjustment or span test. After the span adjustment or span test is successfully
completed, the printer executes the print job.
While the data is being printed, the balance may
seem to be frozen, but wait until printing is
completed. No printing is executed if the span
adjustment or test is not successfully completed.
Do not press any keys on the printer during printing.
6-1-3 Printing measurement results
1
Go to the function setting mode.
(Refer to Section 2-6 “Basics of Function
Settings.”)
Press and hold the [Function] key until “Func” is
displayed.
2
Press the [Function] key several times to select “G.GLP.”
Select “1” by pressing the [Zero/Tare] key.
3
Press the [Function] key several times to select “G2.od.”
Select “1” by pressing the [Zero/Tare] key.
4
Save the setting. Press the [Set] key.
The balance returns to the weight display.
5
Print measurement results. Pressing and holding the [Print] key prints the header.
Pressing the [Print] key at any time during
measurements prints the result data.
After the measurement is completed, press and hold
the [Print] key to print the footer.
Do not press any keys on the printer during printing.