Shinko Denshi LF Series, Operation Manual, Page: 71 / 154

4 Adjusting the Scale LF(R) Series Operation Manual
- 60 -
6
Unload the weight from the weighing pan. When span adjustment is completed and “on 0” is
displayed, unload the weight from the weighing pan.
After the weight is unloaded, the balance
automatically starts calibration of the internal
weight.
The display changes to “CH. 0,” “CH. F.S.” and
then “End.”
7
Finish the calibration of the internal weight. When “4.M.E.H.*” is displayed, press the [Function] key to
return to measurement mode.
* For details on “4.M.E.H.*,” refer to Section 4-3
“Entering the instrumental error of a weight for
use.”)
1. When the [Print] key is pressed during span adjustment or span test, “StOP” is displayed.
Then the span adjustment or span test is discontinued and the balance returns to the weight
display.
2. For span adjustment or a span test with external weight, use a weight that weighs 50% or
more of the weighing capacity. To calibrate the balance more accurately, use a weight that is
equivalent to the weighing capacity.