Shinko Denshi LF Series, Operation Manual, Page: 54 / 154

LF(R) Series Operation Manual 3 Various Measuring Methods
- 43 -
Detailed function settings
The limit function can be set to a specific value with the function settings.
When the function setting “2.SEL” is “2” or “3,” the following items can be set by pressing the
[Function] key. Set these items as required.
☆ Initial setting
Condition 21.Co.
☆
1: Always judge.
2: Judge only when the balance is stable.
Range to cover 22.Li
☆
0: Detect when the limit is exceeded by more than five
divisions.
1: Detect when the limit is exceeded by more than fifty
divisions
2: Detect both when the limit is exceeded and when it is
not reached.
Point scale 23.Pi
☆
0: 1-point scale (OK and LO are judged.)
1: 1-point scale (HI and OK are judged.)
2: 2-point scale (HI, OK, and LO are judged.)
3: 3-point scale (Ranks 1 to 4 are judged.)
4: 4-point scale (Ranks 1 to 5 are judged.)
Judge using 24.tYP.
☆
1: Judge using definite values
2: Judge using deviation values
Buzzer for rank 1 25.bu.1
☆
0: The buzzer is not sounded for rank 1 (LO).
1: The buzzer is sounded for rank 1 (LO).
Buzzer for rank 2 26.bu.2 ☆ 0: The buzzer is not sounded for rank 2 (OK).
1: The buzzer is sounded for rank 2 (OK).
Buzzer for rank 3 27.bu.3
☆
0: The buzzer is not sounded for rank 3 (HI).
1: The buzzer is sounded for rank 3 (HI).
Buzzer for rank 4 28.bu.4
☆
0: The buzzer is not sounded for rank 4.
1: The buzzer is sounded for rank 4.
Buzzer for rank 5 29.bu.5
☆
0: The buzzer is not sounded for rank 5.
1: The buzzer is sounded for rank 5.
Separate limit values can be saved for each weighing mode. However, limit values
of both definite and deviation values cannot be saved in the same weighing mode.
Limit values can be set only in measurement mode display (Cannot be set in other
mode displays such as when a cumulative value is displayed).
Adjust the zero-point or set a tare range, as required, before setting limit values.
If the limit value entries are not lined up in the order of magnitude, three “
” will
light up. Enter the values again.