Shinko Denshi LF Series, Operation Manual, Page: 57 / 154

3 Various Measuring Methods LF(R) Series Operation Manual
- 46 -
Judgment using definite values by entering values
Set the upper limit and the lower limit by using the keys.
Check that the limit function for judgment using definite values is selected. (Refer to the
previous section “Limit function settings.”)
1
Set to actual sample weight setting mode.
<Press and hold>
Press and hold the [Set] key until “L.SEt” is displayed.
2
Enter the lower-limit value. Enter the lower-limit value with the following steps:
(1) Press the [Zero/Tare] key.
The rightmost digit will blink.
(2) Select a number by pressing the [Zero/Tare] key.
Pressing the key toggles the number between 0 and
9, and the decimal point.
(3) Press the [Function] key to move to the next digit,
which will then start blinking.
(4) Press the [Set] key to save the number.
For 1-point setting, this operation completes the
setting save process. Proceed to step 4.
For 2-point setting, “H.SEt” is displayed.
3
Enter the upper-limit value.
Enter the upper-limit value by doing the same operation
as in step 2.
The values for judgment are saved and the balance
returns to the weight display.
4
Weigh a sample. Place the sample to be judged on the weighing pan.
The OK/LO/HI result judged according to the upper-limit
and lower-limit is indicated by “ ”.