Shinko Denshi LF Series, Operation Manual, Page: 51 / 154

3 Various Measuring Methods LF(R) Series Operation Manual
- 40 -
3-7 Judging between Too Heavy and
Too Light (Limit Function)
You can set several limit values to be used to judge whether measurements are within the
specified limits.
The limit function can be used in simple weight measurement mode, counting mode,
percentage weighing mode and unit conversion mode.
Judgment method
According to the lower and upper limits you set, a measurement is judged to be too light
(lower than the lower limit), within the appropriate range, or too heavy (higher than the upper
limit), and the judgment result is displayed using the “ ” symbol.
Judgment
result
1-point setting (lower
limit)
2-point setting (upper &
lower limits)
Above the
upper limit
Not displayed Upper limit < Weight
Appropriate
Lower limit ≤ Weight
Lower limit ≤ Weight ≤
Upper limit
Below the
lower limit
Weight <
Lower limit
Weight < Lower limit
For a 3- or 4-point setting, “ ” appears on the display in 4 or 5 steps according to the
judgment result.
Judgment result 3-point/4-point setting
Rank 5
(4-point setting)
Point 4 ≤ Weight
Rank 4 Point 3 ≤ Weight < Point 4
Rank 3 Point 2 ≤ Weight < Point 3
Rank 2 Point 1 ≤ Weight < Point 2
Rank 1 Weight < Point 1