Shini ST1-S User Manual Download

Page: 50 / 142

50(142)

Control robot via hand controller manual keys:

Main arm up/down:

If main arm going-up, press this key main arm will going-down.

If main arm going-down, press this key main arm will going-up.

Main arm forward/backward:

If main arm moving backward, press this key main arm will move forward.

If main arm moving forward, press this key main arm will move backward.

Vacuum on/off:

If vacuum off, press this key will vacuum on (suckt parts).

If vacuum on, press this key will vacuum off (release parts).

Grasp on/off:

If grasp off, press this key will grasp on (grasp parts).

If grasp on, press this key will grasp off (release parts).

Cylinder rotate horizontal/vertical:

If cylinder in horizontal state, press this key cylinder will rotate vertical.

If cylinder in vertical state, press this key cylinder will rotate horizontal.

Sub-arm up/down:

If sub-arm going-up, press this key sub-arm will going-down.

If sub-arm going-down, press this key sub-arm will going-up.

Sub-arm forward/backward:

If sub-arm moving backward, press this key sub-arm will move forward.

If sub-arm moving forward, press this key sub-arm will move backward.

Grip on/off:

If grip off, press this key will grip on (grip parts).

If grip on, press this key will grip off (release parts).

Traverse

In manual mode, control robot traverse operation in main menu or IO watch

page.

Extend Output

Summary of Contents for ST1-S















































































































































Search results

Summary of Contents for ST1-S

Reviews:

Related manuals for ST1-S

Brands by name

Popular brands

Shini ST1-S, User Manual

Search results

Summary of Contents for ST1-S

Reviews:

Related manuals for ST1-S

Brands by name

Popular brands