Shini ST1-S User Manual Download

Page: 76 / 142

76(142)

Picture 4-27

Robot direction: the option is used to setup the direction of robot mounted on

injection molding machine. Note: this setup must be right. After changing

direction, please re-back to home position.

Max physical distance: the option is used to setup robot max traverse

displacement. Note: this setup must be right, otherwise will damage machine

equipments.

Reset parameters: the parameters of history alarm, product sum and system

overall reset can be reset. Press F3 to reset parameter.

History alarm: reset 30 records at most.

Product sum: rest product numbers to 0.

System overall reset: including action program, max physical distance, etc.

Servo speed: min: 1%, max: 100%.

Servos accelerate time: set the accelerate time of servo start and stop. The

higher speed of servo, the longer accelerate time.

Maintenance molds:

“

”

stands for no setting. If setting value, when system

running to the setting value will stop automatic running. Reset it robot will able

automatic running again.

Summary of Contents for ST1-S















































































































































Search results

Summary of Contents for ST1-S

Reviews:

Related manuals for ST1-S

Brands by name

Popular brands

Shini ST1-S, User Manual

Search results

Summary of Contents for ST1-S

Reviews:

Related manuals for ST1-S

Brands by name

Popular brands