56(65)
5.
Trouble-shooting
5.1 Granulator Can Not Work
1) Check if the emergency stop has not been reset. If not, rotate the Button
anti-clockwise to reset it.
2) Check whether feed box is fully closed. If not, the machine could not be
started.
3) Check the motor's overload protector.
The overload protector in the electrical control box will work if the motor
overloads. Under that situation, (A) (the green pole) will sprout. Press the
Reset button (B) to reset it. Before startup again, check whether there is
any material in the granulator.
4) Check the space between blades.
Motor overload protection will trip and machine will stop if the blade is very
blunt or the space between blades is not correct.
Inspect blades, renew them or re-adjust blades space.
5.2 Stop Due to Other Reasons
Connection failure or looseness of safety switch can also cause shutdown
Note!
Do not disconnect to safety switch or control switch.
Summary of Contents for SG-24T
