Shindaiwa DG15BMK, Owner'S And Operator'S Manual

Page: 41 / 52

36
Description Daily
Every
100
hours
Every
200
hours
Every
400
hours
Every
500
hours
Every
800
hours
Every
1,000
hours
Every
1500
hours
Every
2,000
hours
Every
3,000
hours
Remarks
15
Adjust V-belt
Tension
1st time
at 50hrs
●
16 Replace V-belt
Or
2years
●
17
Clean Radiator Fin
(External)
●
18
Clean Radiator
(Internal)
●
19
Replace
Fuel/Coolant/Oil
Hoses and
Anti-Vibration
Rubber
Every
2years
●
20
Check of valve
clearance
●
21
Check of fuel
injection nozzle
injection pressure
●
22
Check of injection
pump
●
23
Clean/Inspect Spill
Containment
Or
1years
●
(1) Engine Oil Replacement
1st time 50 hours
2nd time
and after
Every 100 hours
1) Set a container to catch spilled engine oil.
2) Remove the oil filler.
3) Remove the oil drain plug and drain the
engine oil.
4) After the oil has been drained, close and
tighten the oil drain plug.
5) Add oil through the oil filler until it is at the maximum level on the oil level gauge. (Fill with
approx. 3.6 L.)
6) Attach the oil filler cap.
<Note>

Refer to section "8-1. Checking Engine Oil" for the types and amounts of engine oil.

Replace the packing of the oil drain plug with a new part each time the oil is changed.

Packing part no.: 6C090-58961 (Kubota part no.)

After tightening the oil drain plug, operate the engine for a short period and check that
there is no oil leakage. Stop the engine when completed.

Always be sure to wipe away any spilled engine oil.
Oil Filler
Oil Drain Plug
Oil Level
Gauge