Shindaiwa DG15BMK, Owner'S And Operator'S Manual

Page: 18 / 52

13
Oil Press
Water Temp
Charge
Spill
Containment
5-3. Error Code Display
The equipment includes an error code display
［
E06
］
function that notifies the operator of
Engine over speed after the engine shuts off automatically. Consult your authorized dealer
when the error code
［
E06
］
is displayed on the meter.
5-4. Monitor Lamp
Warning: Injuries/Electric Shock

Do not operate the equipment with any doors or covers open, and always lock
them. There is a danger of hair, body parts and other items being caught up in
moving parts such as cooling fans and belts.
Caution: Burns

The engine, muffler and similar parts and surrounding components are extremely
hot during operation and immediately after stopping the equipment. Never touch
hot parts.

Never open the radiator cap during operation or immediately after stopping the
equipment. Hot coolant and steam will spurt out.

Always be sure to stop the engine and leave the engine to cool down before
performing any inspection/maintenance such as engine oil checking or fuel filter
checking. Opening the oil level gauge or oil filler during operation will result in
hot oil spurting out.
The equipment includes monitor lamps for "WATER TEMP", "CHARGE", "OIL PRESS" and
"SPILL CONTAINMENT".
If the equipment is normal, the "CHARGE" and "OIL PRESS" monitor lamps light up when
the starter switch is switched from "STOP" to "RUN", and all monitor lamps turn off when
the engine is started. If any error besides that of spill containment occurs during operation,
the corresponding monitor lamp illuminates and the engine is automatically stopped.
If the engine is automatically stopped, return the starter switch to "STOP" and restart the
engine.
Watch the lit/unlit status of the monitor lamps the next time an automatic stop
occurs and check the error contents.