CAUTION:
TO PREVENT ELECTRIC SHOCK,
DO NOT REMOVE COVER. NO USER-SERVICEABLE
PARTS INSIDE.REFER-SERVICING TO QUALIFIED
SERVICE PERSONNEL.
7
Connect the PRE OUT jacks to the power amplifers connected to speakers
or to powered speaker respectively.
We recommand that you use Sherwood power amplifer AM-9080 for 5
channels (front L/R, rear L/R, center) for easy operation and installation.
Although left and right outputs are offered for CENTER and SUBWOOFER,
both channels produce the same signal.
Connect one or both channels as required by the power amplifier or powered
subwoofer used.
Components such as CD, LD or DVD capable of
digital output of DTS Digital Surround, Dolby
Digital, PCM or digital RF should be connected to
these inputs.
For details, refer to the operating instructions of
the component connected.
When making the COAXIAL DIGITAL connection,
be sure to use a 75
Ω
COAXIAL cord, not a
conventional AUDIO cord.
These outlets are switched on (power on mode)
and off (standby mode) according to power
control as follows: (Maximum total capacity is
100 W)
Standby mode - switched AC outlet off
Power on mode - switched AC outlet on
PRE OUT connections
SWITCHED AC OUTLETS
Plug this cord into a wall AC outlet
AC INPUT CORD
CONNECTING DIGITAL INPUTS
ENGLISH
