20
Do the steps 11 to 13 in”Adjusting each
channel level” until the sound level of each
speaker is heard to be equally loud.
Cancel the test tone function.
Enter the test tone mode.
In these modes, the volume level of each channel can
be adjusted easily with the test tone function.
The test tone will be heard from the speaker of each
channel for 2 seconds as follows;
When the speaker setting is set to the “None” or “No”
mode, the test tone of the corresponding channel is
not available.
When the distances from the prime listening position
to front left, center, front right and rear (left and right)
speakers are same, the basic settings are as follows
according to either the Dolby Digital or the Dolby Pro
Logic mode;
- In the Dolby Digital mode
Center delay time : 0 ms, Rear delay time : 0 ms
- In the Dolby Pro Logic mode.
Rear delay time : 15 ms
If the center or the rear speaker(s) is (are)not at the
same distance from the prime listening position as the
front speakers, increase or decrease the center delay
time by 1 ms for every about 30 Cm (1 foot) it is
closer or farther away and increase or decrease the
rear delay time by 5 ms for every about 1~1.5 m (3~5
feet) it is closer or farther away.
The delay time will be displayed for 5 seconds.
Only in the Dolby Digital mode, the center delay time
can be adjusted and the corresponding delay time is
flikering.
In DTS, Dolby Digital, Dolby Pro Logic
or Dolby 3 Stereo mode
Check the delay time to be adjusted.
In Dolby Digital, Dolby Pro Logic mode,
adjusting delay times of the speakers
In the DTS and the Dolby Digital modes
Front L
Center
Front R
Rear R
Rear L
Sub Wfr
In the Dolby Pro Logic mode
Front L
Center
Front R
Rear R
Rear L
In the Dolby 3 Stereo mode
Front L
Center
Front R
TEST TONE
TEST TONE
or
DELAY TIME
ENGLISH
or
or
