Select the desired rear speaker mode.
7
18
Memorize the desired center speaker mode
while it flickers.
6
The desired center speaker mode is memorized and
then it enters the rear speaker mode.
In Dolby 3 Stereo mode, it will enter the subwoofer
mode directly, this means the rear speaker mode
can not be selected.
If the center speaker display disappears, start from
the above step 2 again.
Each time this button is pressed,the front speaker
mode changes and flickers for 5 seconds as follow;
: When using the relatively large front speakers
(full range speakers).
: When using the relatively small front speakers
(which cannot reproduce the low range bass
sounds deeply).
Select the desired front speaker mode.
3
Adjusting the speaker settings
Press the SPEAKER MODE button for more than 2
seconds to enter the front speaker mode.
2
Select the desired center speaker mode.
5
Adjusting the settings of front, center, rear speakers
and subwoofer connected.
If the speaker setting is adjusted to “Small”, the low
range bass sound of the channel(s) is redirected to the
subwoofer or the front channels and if the speaker
setting is adjusted to “None”, the sound of the
channel(s) is redirected to other channels.
The front speaker mode is displayed.
:When using a relatively large center speaker
(full range speaker).
:When using a relatively small center speaker
(which cannot reproduce the low range bass
sounds deeply).
:When not using a center speaker.
Only in the Dolby Digital or the Dolby Pro Logic mode,
the “None” mode can be selected.
Each time this button
is pressed, the center
speaker mode changes
and flickers for 5
seconds as follows;
Each time this button is
pressed, the rear speaker
mode changes and flickers
for 5 seconds as follows;
Large
Small
None
Large
Small
:When using the relatively large rear speakers
(full range speakers).
:When using the relatively small rear speakers
(which cannot reproduce the low range bass
sounds deeply).
:When not using the rear speakers.
Only in the Dolby Digital or the Dolby Pro Logic mode,
the “None” mode can be selected.
Large
Small
None
Memorize the desired front speaker mode
while it flickers.
4
The desired front speaker mode is memorized and
then it enters the center speaker mode.
If the front speaker display disappears, start from
the above step 2 again.
In Theater, Hall, Stadium, Church mode, it will
enter the rear speaker mode directly, this means the
center speaker mode can not be selected.
In normal stereo mode, it will enter the subwoofer
mode directly, this means the center and the rear
speaker modes can not be selected.
ENGLISH
SPEAKER MODE
SPEAKER MODE
SPEAKER MODE
ADJUST
ADJUST
ADJUST
