Adjusting the tone (bass and treble)
Enter the tone mode.
7
To listen to a program source without the tone effect.
The TONE DIRECT button lights up in green and the
sound that bypasses the tone circuitry will be heard.
To cancel the tone direct function, press this button
again.
9
At the desired channel mode, adjust the tone
as desired
At the Fr(ont)/Cen(ter) channel mode, the bass or the
treble of the front and center channels can be adjusted
together.
If the TONE FLAT button is pressed, the bass and the
treble of the selected channel are all adjusted to the flat
level (0 dB).
If the tone display disappears, start from the step 7
again.
Note : Extreme settings at high volume may damage your
speakers.
8
Each time this button is pressed, the corresponding
channel is selected and shown for 3 seconds as
follows;
“Front Tone Mode”
“Center Tone Mode”
“Fr/Cen Tone Mode”
The Fr(ont)/Cen(ter) channel mode can be selected
when the bass and the treble of the front and the center
channels are all adjusted to the flat level(0 dB).
15
T O N E D I R E C T
ENGLISH
TEST TONE
FLAT
TREBLE
BASS
or
