23
Select the desired preset number (1~30) and
press the MEMORY/ENTER button.
3
1
Repeat the above steps 1 to 3 to memorize
other stations.
4
Select the desired preset number.
2
After selecting the tuner as input source,
select the preset tuning mode. (“Preset
Mode” lights up.)
When using the NUMERIC buttons on the remote control.
When using the NUMERIC buttons on the remote control.
When selecting the desired preset number with the
NUMERIC button, the desired preset station will be tuned
to automatically with out selecting the preset tuning mode.
Listening to FM stereo broadcasts
When FM stereo broadcasts are poor because of weak
broadcast signals, select the FM mono mode to reduce
the noise, then FM broadcasts are reproduced in
monaural sound
Each time this button is pressed, the FM mode
changes as follows;
Stereo mode : “Stereo Mode” lights up
Mono mode : “Mono Mode” lights up
While listening to FM broadcasts.
The unit will start scanning the stations in the preset
sequence and each station is received for 5 seconds.
At the desired station, press this button again to stop
scanning.
Scanning preset stations in sequence
Tuning to preset stations
MEMORY BACKUP FUNCTION
The following items set before the unit is turned off are
memorized.
• INPUT SELECTOR settings
• VIDEO 1 REC SELECTOR settings
• Surround mode settings
• Preset stations
• Video labels, etc.
Note : If the electricity fails or the AC input cord is
disconnected for about 2 weeks, the memorized
contents are all cleared. So you should memorize
them again.
The station has now been stored in the memory.
When using the NUMERIC buttons, the station is
stored automatically without the MEMORY/ENTER
button.
A stored frequency is erased from the memory by
storing another frequency in its place.
If “01” goes off, start again from the above step 2.
Examples)
For “3” :
For “15” :
within 2 seconds
Examples)
For “3” :
For “15” :
within 2 seconds
ENGLISH
FM MODE
T/P MODE
PRESET/TUNING
PRESET/TUNING
PRESET/TUNING
PRESET/TUNING
MEMORY/ENTER
