D I G I TA L I N P U T
14
“MUTE” will flicker.
To resume the previous sound level, press it again.
When the headphones are plugged, the sound from the
speakers is cut off.
When listening to DTS or Dolby Digital program source
in the DTS or the Dolby Digital mode, if the headphones
are plugged, it enters the 2-CH downmix mode
automatically.
(For details, refer to “Downmixing into 2 front channels”
on page 21)
To listen with the headphones.
6
Operate the selected component for play back.
3
Each time this button is pressed, the corresponding
input is selected as follows. When a digital input is
selected, the DIGITAL INPUT button lights up in
green.
– In the Dolby Digital mode:Not available for CD
– In the DTS mode.
Opt(ical)
Coax(ial)
Select the digital (or the analog) input
connected as desired.
When CD, DVD, LD or AUX/TV is selected
as input source
(RF:LD PLAYER only)
Opt(ical)
Coax(ial)
To play back the laser disc encoded into the Dolby Digital
format in the Dolby Digital mode, you should select the RF
input as the desired digital input.
– In the normal stereo or a surround mode other than the
DTS and Dolby Digital modes.
To listen to Dolby Digital program source in the 2-CH
downmix mode, in the stereo mode, the corresponding
digital input (LD player : RF)
should be selected. (For details, refer to “Downmixing
into 2 front channels” on page 21)
Notes :
When the selected optical or coaxial digital input is not
connected, the selected “Opt” or “Coax”will flicker,
meaning no sound.(Refer to “Select the desired
surround mode” on page 17.)
When the DTS or the Dolby Digital mode is selected,
the component connected to the selected digital input
can be heard regardless of the selected input source.
When playing back the program sources with surround
sound, refer to “ENJOYING SURROUND SOUND”
on page17.
Opt(ical)
Coax(ial)
PHONES
Adjust the (overall) volume.
4
2
To mute the sound.
5
or
M A S T E R V O L U M E
DOWN
UP
ENGLISH
