19
• If the channel display disappears, start from the above
step 11 again.
Select the desired subwoofer mode.
9
CH SELECTOR
Each time this button is pressed, the corresponding
channel is selected and shown for 3 seconds as follows;
Front L
Center Front R Rear R Rear L Sub Wfr
According to the surround mode or the speaker
setting(None or No), center, rear or subwoofer channel
will not be selected.
Memorize the desired rear speaker mode
while it flickers.
8
Memorize the desired subwoofer mode
while it flickers.
Select the desired channel.
Adjust the level of the selected channel as
desired.
Repeat the above steps 11 and 12 to adjust other channel levels.
The desired rear speaker mode is memorized and then
it enters the subwoofer mode.
If the rear speaker display disappears, start from the
above step 2 again.
Each time this button is pressed, the subwoofer mode
changes and flickers for 5 seconds as follows;
In case that the front speaker mode is set to “Small”,
the subwoofer mode is automatically set to “Yes”.
Each time this button is pressed briefly, the
corresponding speaker settings are displayed in turn.
Checking the speaker setting
Adjusting each channel level
If the subwoofer display disappears, start from the
above step 2 again.
: When using a subwoofer
: When not using a subwoofer.
Yes
No
or
or
ENGLISH
SPEAKER MODE
SPEAKER MODE
SPEAKER MODE
LEVEL
ADJUST
