SHERCO 250 SEF RACING, Owner'S Manual

Page: 106 / 306

106
ADJUSTING THE CHASSIS
HANDLEBAR POSITION
The triple clamps have two holes separated by a
distance A.
The handlebar clamps are offset by a distance B.
The bike comes standard with the handlebars in the
rear most position.
Remove the four screws . Remove the handlebar
top clamps and remove the handlebar.
Remove the two screws . Remove the lower clamps
and place them in the desired position.
Replace the handlebars and top clamps.
Replace the four screws and tighten evenly.
The handlebars can be rotated forward and rearward
in the clamps.
Distance between holes A
Handlebar offset B
13mm
4mm
1
Handlebar
lower clamp
Handlebar clamps
fixing screws
M10x35 40Nm
M8x25
Loctite ® 243™
25Nm
1
2
B
1
2
A