SHERCO 250 SEF RACING, Owner'S Manual

Page: 100 / 306

100
COOLING SYSTEM
DRAINING THE COOLANT
Make sure the motorbike is upright and on level ground.
- Place a container under the bike.
- Remove the cap and screw .
- Allow the coolant to drain.
To protect the environment, dispose of the drained liquid to a
collection point.
WARNING
Check the fluid level in the expansion container.
The liquid should reach the level on the container
where it indicates “LEVEL MIN”.
If the level is not correct, unscrew the cap .
Fill with fluid until it reaches the LEVEL MIN mark.
Replace the cap .
3
Approved Coolant Motul ® Motocool
Factory Line -35°C
2
3
1
NOTE
3
1
2