Shenzhen Kinan Technology KC2108i, User Manual

Page: 65 / 98

KC2108i /KC2116i/KC2132i User Manual
- 65 -
User select box
This selection box displays the user ID for which the values are
shown and for which the changes will take effect. You may change the settings of
other users if you have the required privileges.
Transmission Encoding
The Transmission Encoding setting allows changing the image-encoding
algorithm that is used to transmit the video data to the Remote Console window.
It is possible to optimize the speed of the remote screen processing depending
on the number of users working at the same time and the network bandwidth of
the connection line (Modem, ISDN, DSL, LAN, etc.).
Automatic detection
The encoding and the compression level is determined automatically from the
available bandwidth and the current content of the video image.
Pre-configured
The pre-configured settings deliver the best result because of optimized
adjustment of compression and colour depth for the indicated network speed.
Manually
Allows to adjust both compression rate and the colour depth individually.
Depending on the selected compression rate the data stream between the IP-KVM
and the Remote Console will be compressed in order to save bandwidth. Since high
compression rates consum more computing power of IP-KVM, they should not be
used while several users are accessing the IP-KVM simultaneously.
The standard color depth is 16 Bit (65536 colors). The other color depths are
intended for slower network connections in order to allow a faster transmission of
data. Therefore compression level 0 (no compression) uses only 16 Bit color depth.
At lower bandwidths only 4 Bit (16 colors) and 2 Bit (4 gray scales) are
recommended for typical desktop interfaces. Photo-like pictures have best results
with 4 Bit (16 gray scales). 1 Bit color depth (black/white) should only be used for
extremely slow network connections.
Remote Console Type
Specifies, which Remote Console Viewer to use.
Default Java-VM
Uses the default Java Virtual Machine of your Browser. This may be the Microsoft
JVM for the Internet Explorer, or the Sun JVM if it is configured this way. Use of the
Sun JVM may also be forced (see below).
Sun Microsystems Java Browser Plugin
Instructs the web browser of your administration system to use the JVM of Sun
Microsystems. The JVM in the browser is used to run the code for the Remote
Console window, which is actually a Java Applet. If you check this box for the first
time on your administration system and the appropriate Java plug-in is not already
installed on your system, it will be downloaded and installed automatically.