Shenzhen Kinan Technology KC2108i, User Manual

Page: 75 / 98

KC2108i /KC2116i/KC2132i User Manual
- 75 -
Chain rule
The Chain rule determines whether the access from the hosts is allowed or not. It
can be one of these two values:

ACCEPT : access allowed

DROP : access not allowed
The rule can be configured to apply to a particular Group level (All, User, Super,
Administrator).
When the IP-KVM receives a TCP packet, it will process the packet with the chain
rule depicted below. The process ordering is important; The packet will enter the
chain rule 1 first, if meet the rule then take action directly, otherwise go to chain rule
2.
TCP packet
No
Rule 1
Rule 2
Rule ..
Rule n
Default Rule
Action 1
Yes
No
No
No
Action 2
Yes
Action 3
Action 4
Action 5
Yes
Yes
Yes
Figure 6-20 Chain Rules of IP Filtering
Check the “Enable Group based System Access Control” to edit the rules
Users can add a new IP filtering rule by setting the properties at adding line by
Append or Insert . User can remove a rule by Remove or Delete .