Sharp UX-B800SE - B/W Inkjet - Fax Operation Manual Download

Page: 9 / 76

Unpacking Checklist

1. Installation

Points to keep in mind when
setting up

♦

Do not place the machine in direct
sunlight.

♦

Do not place the machine near
heaters or air conditioners.

♦

Keep dust away from the machine.

♦

Keep the area around the machine
clear.

About condensation

If the machine is moved from a cold to a
warm place, condensation may form on
the scanning glass, preventing proper
document scanning. To remove the
condensation, turn on the power and
wait approximately two hours before
using the machine.

1. Installation

Unpacking Checklist

Manual

Print
cartridge

Paper
tray

Document
exit tray

Remove the packing tape

Open the cover (

➊

) and remove the

tape (

➋

). (Do not install the print

cartridge yet.)

Setup

Connect the handset

Handset
cord

Rapid
Key
labels

Setup
guide

Handset

Phone
line
cord

Received
document
tray

Attach the trays

Attach the received
document tray

Close the cover.

Summary of Contents for UX-B800SE - B/W Inkjet - Fax













































































Search results

Summary of Contents for UX-B800SE - B/W Inkjet - Fax

Reviews:

Related manuals for UX-B800SE - B/W Inkjet - Fax

Brands by name

Popular brands

Sharp UX-B800SE - B/W Inkjet - Fax, Operation Manual

Search results

Summary of Contents for UX-B800SE - B/W Inkjet - Fax

Reviews:

Related manuals for UX-B800SE - B/W Inkjet - Fax

Brands by name

Popular brands