Sharp UX-B800SE - B/W Inkjet - Fax Operation Manual Download

Page: 64 / 76

Clearing Paper Jams

Clearing a jammed document

If the original document doesn’t feed
properly during transmission or copying,
or [

DOCUMENT JAMMED

] appears in

the display, first try pressing

. If

the document doesn't feed out, remove
it as explained below.

Important:

Do not try to remove a

jammed document without releasing it
as explained below. This may damage
the feeder mechanism.

Open the cover (

➊

). Rotate the lever

so that points straight up (

➋

), and

pull it up (

➌

). Pull the roller out to the

right, and remove the document (

➍

Clearing Paper Jams

Clearing jammed printing paper

Open the cover (

➊

). Pull the

jammed paper forward or backward
out of the machine as appropriate
(

➋

), taking care not to tear it.

Replace the white roller, inserting
the left end first. Push the lever
down and rotate it back down
(

➊

).Close the cover, pressing firmly

on both front corners (

➋

Close the cover, pressing down
firmly on both front corners.

Summary of Contents for UX-B800SE - B/W Inkjet - Fax













































































Search results

Summary of Contents for UX-B800SE - B/W Inkjet - Fax

Reviews:

Related manuals for UX-B800SE - B/W Inkjet - Fax

Brands by name

Popular brands

Sharp UX-B800SE - B/W Inkjet - Fax, Operation Manual

Search results

Summary of Contents for UX-B800SE - B/W Inkjet - Fax

Reviews:

Related manuals for UX-B800SE - B/W Inkjet - Fax

Brands by name

Popular brands