background image

67

 

S  H  A  R  P

Date Revised:                  .

Date Issued: :Apr. 25. 2006

MATERIAL SAFETY DATA SHEET (3/3)

MSDS No. B-1029

Section 13.  Disposal Consideration     

Waste Disposal:

This product is not a listed hazardous waste in accordance with Federal Regulation 40 CFR Part 261. If 
discarded in its purchased form, this product would not be a hazardous waste either by listing or by 
characteristic. However, under RCRA, it is the responsibility of the product user to determine at the time of 
disposal whether a material has been contaminated and should be classified as a hazardous  waste. Disposal 
is subject to local, state and federal regulations.

Section 14.  Transport Information  

DOT Status  :

Not classified as a hazardous material or substance under US DOT.

DOT Shipping Name  :

 Not applicable

DOT Reportable Quantity :

Not applicable

Hazard Class  :

 Not 

applicable

DOT Packing Group :

  

Not applicable

Section 15.  Regulatory Information

TSCA (USA)

 All ingredients are listed on the Toxic Substances Control Act (TSCA) inventory, have been 

registered, or are exempt.

SARA / EPCRA (USA) :

 

None of the ingredients in this product has a final reportable quantity (RQ) under 
Emergency Planning and Community Right-to Know Act (EPCRA)- Section 302 
: Extremely Hazardous Substances (EHS) or notification requirements for EHS 
under Section 304.

California Proposition 65 :

This product contains no known materials at levels which the State of California 
has found to cause cancer, birth defects or other reproductive harm - California 
Proposition 65.

DSL (Canada) : 

All ingredients are listed on the Canadian Domestic Substances List (DSL), have been 
registered on the Non-Domestic Substances List (NDSL), or are exempt.

EINECS (Europe) :

  All ingredients are listed on the European Inventory of Existing Commercial Substances 

(EINECS) list, have been registered on the European List of New Chemical Substances 
(ELINCS), or are exempt.

ENCS (Japan) :

All ingredients are listed on the Japanese Existing and New Chemical Substances 
(ENCS) list,have been registered, or are exempt.

AICS (Australia)  :

All ingredients are listed in Australian Inventory of Commercial Substances (AICS), or 
are registered in Australia.

ECL (Korea)  :

All ingredients are listed on the Korean Existing Chemicals List (ECL), have been 
registered, or are exempt.

WHMIS Hazard Class (Canada)  :

Not a WHMIS controlled product.

Section 16.  Other Information

Reference  :

IARC(1996): IARC monographs on the Evaluation of the Carcinogenic Risk of Chemicals to 
Humans, Vol. 65, Printing Process and Printing Inks, Carbon Black and Some Nitro Compounds, 
Lyon, pp.149-261
H.Muhle, B.Bellmann, O.Creutzenberg, C.Dasenbrock, H.Ernst, R.Kilpper, J.C.MacKenzie, 
P.Morrow, U.Mohr, 
S.Takenaka, and R.Mermelstein(1991) Pulmonary Response to Toner upon Chronic Inhalation 
Exposure in Rats. 
Fundamental and Applied Toxicology 17, pp.280-299.

Restrictions :

This information relates only to the specific material designated as supplied by the manufacturer.  
This information is supplied to us by the manufacturer and Sharp offers no warranties as to its 
accuracy and accepts no responsibilities for any typographical errors which may appear on these 
sheets.  The information on this data sheet represents best opinion as to the proper use in handling 
of this product under normal conditions. However, all materials may present unknown hazards and 
should be used with caution. Although certain hazards are described herein, we do not guarantee 
that these are the only hazards which exist. It is the responsibility of the user to determine the 
suitability of this product for each particular use.

Revision Information :  

2006/Apr./25  Not applicable in this time due to new issue.

Summary of Contents for UX-B800SE - B/W Inkjet - Fax













































































Reviews: