T-2
T
roubl
esh
ooti
n
g
Trouble when Starting
Why doesn't the power indicator or the battery indicator turn on?
•
Make sure the AC adapter is correctly connected to the AC adapter jack of your
computer.
•
Make sure the AC power cable is correctly connected to a live wall outlet. Connect
another electric equipment to the wall outlet and check whether it is live or not.
•
Make sure the battery pack is correctly installed and charged.
•
If the battery pack is discharged, connect the AC adapter.
•
If all the steps above failed, follow the instructions on
Why doesn't the keyboard or
the glide pad function
?
Why do I get the message
Invalid system disk
?
•
You may have inserted a non-bootable disk in the optional external floppy disk
drive unit (either a defective disk or one without an installed operating system).
Remove the disk.
Why can’t I boot from the floppy disk?
•
Make sure that the optional external floppy disk drive unit is correctly connected to
your computer.
•
Check whether the floppy disk set to the optional external floppy disk drive unit
contains a system disk.
•
Check whether
USB Emulation
in
Main
menu of the Setup Utility is enabled.
(Refer to the
Main Menu
section in Chapter 5.)
•
Check whether
Floppy Disk Drive
in the
1st Boot Drive
in the
Boot Sequence
in the
Main
menu of the Setup Utility is selected. (Refer to the
Main Menu
in Chapter 5.)
Why do I get the message
Press F1 to Continue, Del to Load CMOS
defaults, F2 to enter SCU
?
•
The setting of the Setup Utility is deleted. Follow these steps:
1.
Press
Delete
key while the message
Press F1 to Continue, Del to Load CMOS
defaults, F2 to enter SCU
is appearing.
2.
On Windows, click
start
–
Control Panel
.
