Advanced menu
In the Advanced menu of the System Configuration Utility, you can change the
following settings:
S p e c i f i c H e l p
S e l e c t
1 and COM 2
T h e
i n d i c a t e s i n t e r n a l
B
7
Hot Key Beep
Shadow =
XX KB
Reserved =
XX% KB
Total RAM
=
KB
C a c h e
=
K B
LPT Extended
I t e m
S e l e c t
< E n t e r > T o g g l e V a l u e
COM Port Enables or disables
and/or COM2 and specifies which devices
are assigned to
and/or COM2.
IR Mode Specifies the mode of the IR Port. Select
in ordinary usage.
LPT Port Assigns the I/O address and the IRQ of the printer port.
LPT Extended Mode Specifies the mode of the printer port. If you select ECP, you
cannot use
in the ZR Mode. (EPP stands for Enhanced Parallel Port, and
ECP stands for Extended Capabilities Port.)
Warning Message Defines whether the warning message appears after
the system restarts if the suspend-to-disk partition is not recognized in the hard disk.
Keyboard NumLock Defines whether the built-in numeric keypad (blue legends) is
active in
mode.
