Printer
Before using the printer, read the printer manual.
To use a printer, complete the following procedures:
l
Connecting the Printer
l
Setting the System Configuration Utility
l
Installing the Printer Driver
Connecting a Printer
1.
Turn off the notebook and the printer.
2.
Open the connector compartment cover on the rear side of the notebook.
3.
With a
cable, connect the printer to the parallel port of your notebook.
If the connector has screws, tighten them.
Setting the System Configuration Utility
1.
Turn on or restart the notebook.
2.
When the message
to enter System Configuration Utility
appears, press
F2.
3.
Click
Advanced.
4.
Select
LPT Port;
then,
Addr 378 IRQ7,
and click
OK.
5.
Click
Exit
and select
Save Changes and Exit.
6.
Click
OK.
The system restarts.
If your printer does not operate appropriately, change
LPT Extended
Mode
under the
Advanced
menu, referring to the printer manual.
Installing the Printer Driver
1.
From the
Start
menu, select
Settings Printers.
2.
Printer.
Add Printer Wizard appears.
4 ’
Peripherals 4-5
