Setting for Each Application
The settings for each communications software are different as below;
however,
most of
them are automatically
done.
(Direct Cable Connection, etc.)
IR Type
The two available IR types are usually
(Infrared Data Association) and
ASK (Amplitude Shift Keying). An appropriate IR type for each application is
automatically selected.
Physical Port
The physical port for the application except TranXit is automatically set. The
physical port for TranXit is set when you install it.
Logical Port
To use TranXit, Zrlink, or Import/Export, disable the logical port:
1.
From the
Start
menu, select
Settings Control Panel.
2.
Double-click
Infrared.
3.
Select
Options.
4.
Uncheck
Enabled infrared communication on:.
5.
Click
OK.
For users in US Canada:
To use Import/Export, also set the port to COM5 in the application.
To use Zrlink, double-click
Sharp ZR,
set ASK to COM4 and
to COM5,
and click
OK.
Also set the port to COM4 in the application.
For users in other countries:
To use Zrlink or Import/Export, also set the port to COM4 in the application.
Although seeming contradictory to the above, this step is necessary.
5-2
Communication Functions
