Changing Bay Units
When shipped, your notebook is equipped with the CD-ROM drive in the right-side
bay and with the floppy disk drive in the left-side bay. You can remove these drives
and replace them as follows:
Right-side Bay
l
Battery pack
. Floppy disk drive
Left-side Bay
l
Battery pack
l
AC adapter
l
The AC adapter can only be installed in the left-side bay.
The CD-ROM drive can only be installed in the right-side bay.
l
You cannot use two floppy disk drives installed at the same time.
Removing the Bay Unit
1.
Turn off the notebook.
2.
Disconnect the AC adapter and all the peripheral devices.
3.
Turn the notebook upside down on a flat place.
4.
Slide the bay lock latch to the releasing position, and gently draw the unit out.
A bay unit may become hot after long use.
Basic Operations 2-7
