Display
You can use a CRT monitor or a TV set as an external monitor. To display only on
a CRT monitor, use a VGA-compliant model or model with 1024x768 or higher
resolution. To display on CRT and LCD simultaneously, use a model with
1024x768 or higher resolution.
Connecting a CRT Monitor
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
From the
Start
menu, select
Settings Control Panel.
Double-click
Display.
V
Select
Settings;
then,
Advanced Properties.
Select
Monitor;
then,
Change . . .
If you see
Show all devices
in the dialog box, select it. If not, go on to the next
step.
Select the manufacturer and the model name of which CRT you want to
connect.
Click
then, Close.
Follow the instructions on the screen, if any.
Close the
Display Properties
window by clicking OK.
Turn off the notebook and the CRT monitor.
Open the connector compartment cover on the rear side of the notebook.
With a 15-pin monitor cable, connect the CRT monitor to the external monitor
port of your notebook. If the connector has screws, tighten them.
Turn on the CRT monitor and the notebook. The display is shown only through
the CRT monitor first.
Switch the display in the procedure in the latter part of this section..
Connecting a
Set
1.
Turn off the notebook and the TV set.
2.
Using a video cable, connect the video output jack of the notebook to the TV
set.
3.
Turn on the TV set, and set it to the video mode.
4.
Turn on the notebook.
4-2
Peripherals
