Sharp PC-9800T, Manual

Page: 90 / 125

6
Memory Module
Your notebook comes with 32MB of memory. You can expand the memory size by
installing a pair of 4MB, 8MB or 16MB memory modules.
Standard Memory Modules Total
4MB x 2 40MB
32MB 8MB x 2 48MB
16MB x 2 64MB
Installing a Memory Module
•
Do not handle the memory module where static electricity is easily
generated such as on the carpet.
•
Before installing the memory module, carefully discharge static
electricity from your body by touching an unpainted metal area.
•
Avoid touching the integrated circuits on a memory module. Handle
all components by the edges.
•
Keep the memory module in the anti-static wrapping until you are
ready to install it.
Follow the steps below to install a memory module:
1.
Turn off the notebook, and disconnect the AC adapter and peripheral devices.
2. Turn over the notebook and place it on a flat surface.
3. Slide the right-side bay lock latch to the releasing position, and gently draw out
the unit in the bay.
4. Remove the screw from the memory compartment cover. (Notice that the
screw is inside the bay.)
Figure 6-2. Removing the screw
6-6 Hardware Expansion